Tramex moisture meters for building, concrete and marine use

Tramex moisture meters detect water in materials without drilling: placed on the surface, they measure the material’s electrical impedance and convert it into a moisture reading within seconds. They are the reference standard for surveyors, building and remediation contractors, installers, shipyards and laboratories, and have been designed and manufactured in Ireland for over forty years.

The 5 series comprises five instruments, each calibrated for a family of materials: ME5 and MEX5 for timber and building materials, CME5 and CMEX5 for concrete and screeds, and Skipper 5 for fibreglass and timber hulls and decks. All have dual-depth measurement, Bluetooth for the Tramex Meters app and a range of common accessories: extension, calibration check box and plates, and electrode protectors. The CMP probe adds in-situ measurement within the body of the concrete.

Not sure which to choose? Below the products you will find the selection guide, or contact us: our technical support will recommend the right model for your application. Free shipping in Italy on orders over €299.

Filter and sort

47 products

off
€683,00 VAT excluded
€478,00
VAT excluded
€583,16
VAT included (22%)
 per 
off
€1.140,00 VAT excluded
€798,00
VAT excluded
€973,56
VAT included (22%)
 per 
off
€765,00 VAT excluded
€535,50
VAT excluded
€653,31
VAT included (22%)
 per 
off
€1.085,00 VAT excluded
€759,50
VAT excluded
€926,59
VAT included (22%)
 per 
off
€710,00 VAT excluded
€497,00
VAT excluded
€606,34
VAT included (22%)
 per 
off
€110,00 VAT excluded
€77,00
VAT excluded
€93,94
VAT included (22%)
 per 
off
€110,00 VAT excluded
€77,00
VAT excluded
€93,94
VAT included (22%)
 per 
off
€27,30 VAT excluded
€19,11
VAT excluded
€23,31
VAT included (22%)
 per 
off
€9,56 VAT excluded
€6,69
VAT excluded
€8,16
VAT included (22%)
 per 
off
€122,85 VAT excluded
€86,00
VAT excluded
€104,92
VAT included (22%)
 per 
off
€102,38 VAT excluded
€71,66
VAT excluded
€87,43
VAT included (22%)
 per 
off
€423,15 VAT excluded
€296,21
VAT excluded
€361,38
VAT included (22%)
 per 
off
€259,35 VAT excluded
€181,55
VAT excluded
€221,49
VAT included (22%)
 per 
Show More

Which Tramex moisture meter is right for you?

What do you need to measure?

  • Timber, plasterboard, plaster, tiles, masonry, roofing: ME5 or MEX5. These are the all-round instruments for building diagnostics and leak detection.
  • Concrete slabs, screeds and floors before laying coverings: CME5 or CMEX5. They are calibrated for concrete (ASTM F2659) and give scales equivalent to the carbide method for cement and anhydrite.
  • Boat hulls and decks: Skipper 5. It has a dedicated fibreglass scale and a hardwood scale, for marine surveys and osmosis diagnosis.

Analogue or digital?

  • ME5 and CME5 (analogue): needle dial with instant reading, four buttons, no menus. The choice for anyone who wants a simple, rugged and fast instrument, and for survey work to find “where the moisture is”.
  • MEX5 and CMEX5 (digital): backlit display with numeric reading, built-in ambient hygrometer (relative humidity, temperature, dew point), inputs for external probes — pin probes for timber, Hygro-i2 for in-situ relative humidity to ASTM F2170 — and reference memory. The choice for anyone who needs to document: test reports, surveys, drying monitoring.

Quick comparison

ME5MEX5CME5CMEX5Skipper 5
MaterialsTimber and building materialsTimber and building materialsConcrete, screedsConcrete, screeds, gypsumFibreglass, timber
DisplayAnalogueDigitalAnalogueDigitalAnalogue
Measuring depth10 / 30 mm9 / 30 mm~20 mm~20 mm10 / 30 mm
Scales5NDT + pins + hygrometer + in-situ RH3 (%, CM cement, CM anhydrite)5 NDT + hygrometer + in-situ RH + pins3 (timber, reduced, GRP)
Ambient hygrometer–●–●–
External probes–Pins, Hygro-i2–Pins, Hygro-i2, CMP–
CMP in-situ probe––●●–
Bluetooth / app●●●●●

Which accessories do you need?

  • Accessory sets (AP-ME, AP-CM, AP-SMM5): if you are starting from scratch, the set for your instrument combines calibration reference, extension and case at a lower price than buying them separately.
  • Calibration check box or plate (CALBOXME5, CALBOXSMM5, CALCRH): essential in an ISO 9001 quality system and for anyone who signs survey or test reports.
  • Extension E5-HBS: for ceilings, large floor areas and hulls; compatible with all models.
  • Electrode protectors MESP: for ME5, MEX5 and Skipper 5, when working on painted or gelcoat surfaces.
  • Probe CMP: for CME5 and CMEX5, adds in-situ measurement up to 100 mm into the body of the slab.

Calibration, warranty and service

All Tramex instruments carry a one-year warranty with online registration. Tramex recommends an annual calibration check: the check boxes and plates allow daily verification on site, while for certified calibration and repairs Innovacheck assists you with shipment to Tramex. For any question on choosing or using the instrument, our technical support is at your disposal.