ABSOLUTE Digimatic ID-C digital indicator Mitutoyo 543-350-10, travel 12.7 mm, resolution 0.001 mm, lug back
- SKU: 543-350-10
- VENDOR: MITUTOYO
Couldn't load pickup availability
Safe and secure payments:
Informazioni di prodotto e di utilizzo
ABSOLUTE Digimatic ID-C digital indicator Mitutoyo 543-350-10, travel 12.7 mm, resolution 0.001 mm, lug back. Indicator with external power supply, -NG, OK, +NG output and an N-ch open drain; protected against dust and water jets, compliant with IEC 60529; stores up to 3 preset values and tolerance settings.
Key features
- Indicator with external power supply, -NG, OK, +NG output and an N-ch open drain
- Protected against dust and water jets, compliant with IEC 60529 (equivalent to IP54).
- stores up to 3 preset values and tolerance settings
- A fast measuring-rate mode (sampling 20 or 50 times/sec) can be set when detecting peaks (MAX/MIN/RANGE).
- The function A(x) can be applied to the measured value, with A freely settable and X = stem position
- Analogue bar on the display with 12 scale types
- GO/±NG tolerance judgement function
Description
Indicator with "open collector" cable
Technical data
| Model | ID-C112JX2 |
| Digital / Analogue | Digital |
| Inch - Metric | Metric |
| Measuring range | 12.7 mm |
| Resolution | 0.001 mm/0.01 mm |
| Max. Permissible Error E MPE (Total Range) | 0.003 mm |
| H MPE (Hysteresis error) | 0.002 mm |
| R MPE (Repeatability) | 0.002 mm |
| Measuring force MPL | ≤2.5 N |
| Protection | IP54 |
| Type | EN ISO standards |
| Data output | Yes |
| Display | LCD, character height 8 mm |
| Max. response speed | Unlimited |
| Sampling rate (MAX/MIN/RANGE) | Standard mode: 100 times/s (max. stem speed 0.1 mm/s for peak measurement) |
| Alarm | Low voltage, ABS composition error, overflow error, setting error |
| Stem ∅ | 8 mm |
| Contact point | Carbide ball, thread: M2.5x0.45 |
| Power supply | 1 CR2032 battery |
| Digital optical scale | ABSOLUTE electrostatic capacitive linear encoder |
| ON/OFF | Yes |
| ZERO / ABS | Yes |
| PRESET (x3) | Yes |
| Lock function | Yes |
| Go/±NG judgement | Yes |
| Selectable counting direction | Yes |
| MAX/MIN/RANGE | Yes |
| Calculation function (with formula) | Yes |
| Selectable analogue measuring range | Yes |
| Signal output | (+NG, OK, -NG): Yes |
| Signal input | No-voltage input, (PRESET_RECALL/ZERO, HOLD_RESET): Yes |
| Tolerance judgement via LED | Yes |
| mm/inch selection | No |
| Mass | 295 g |
| Mitutoyo code | 543-350-10 |
Supplied with
With a 4 m signal cable. One end is fixed to the main unit. No connector is supplied for the other end.
Compatible accessories
- 21EZA198 – Lifting lever (12.7 mm models)
- 21JZA295 – Stem lifting cable Mitutoyo 21JZA295 for indicators, L = 500 mm
- 21EZA105 – Lifting knob (12.7 mm)
- 238774 – Rubber boot
Spare parts and consumables
- 901312 – Standard contact point
- 21EAA423 – Rubber boot Mitutoyo 21EAA423 for 543 series Digimatic indicators
Documentation
Selection guide: ABSOLUTE Digimatic ID-C digital indicators
ABSOLUTE Digimatic ID-C digital indicator Mitutoyo 543-350-10, travel 12.7 mm, resolution 0.001 mm, lug back. Indicator with external power supply, -NG, OK, +NG outputs and an N-ch open drain; protected against dust and water jets, compliant with IEC 60529; stores up to 3 preset values and tolerance settings.
Choose the digital indicator according to travel (12.7 mm) and resolution (0.001 mm/0.01 mm): ID-S and ID-SX for routine inspection, ID-C for advanced functions (GO/NG tolerances, Max/Min/TIR, calculation), ID-F with a large backlit display, ID-H for high precision (0.0005 mm), ID-N/ID-B for compact applications. Check the back type (flat or lug back) and the Ø8 mm stem for mounting on stands and fixtures.
If in doubt, contact us: our technical support will recommend the right model, measuring range and accessories for your application.
Integration and programming
Digimatic instruments with data output transfer measurements using the Mitutoyo Digimatic protocol: by cable with data button to a USB Input Tool (the PC receives them as keyboard input, directly into Excel or SPC software), or wirelessly with U-WAVE transmitters (USB or Bluetooth receiver). Digital indicators can be connected to multi-channel display units and to statistical process control systems.
For integration into test stations, measuring fixtures or SPC software, our technical team will help you choose cables, receivers and software.
Calibration and repair
The instrument is supplied with a Mitutoyo inspection certificate. For ISO 9001 / IATF quality systems, periodic calibration (typically annual) with a traceable certificate is recommended; RODER arranges it through accredited laboratories. Periodically check that the spindle slides smoothly and check repeatability on a gauge block; avoid impacts on the contact point.
Service: RODER S.r.l. – INNOVACHECK division handles calibration with certificate (including ACCREDIA through partner laboratories), periodic verification and repairs of Mitutoyo instruments in Italy. Contact us, stating the model and serial number.