Internal chamfer probe, 90°, D=20-40mm – Mitutoyo 011447
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
Internal chamfer probe, 90°, D=20-40mm – Mitutoyo 011447. Accessory listed in the Mitutoyo catalogue for: ABSOLUTE Digimatic ID-C digital indicators with calculation function.
Description
This is a chamfer gauge for measuring the major diameter of internal tapers and chamfers.
Technical data
| Range | 20 - 40 mm |
| Notes | This chamfer gauge should be adjusted on a flat surface, e.g. a granite plate, to set the start point of the measuring range as the preset value (preset function) |
| Mitutoyo code | 011447 |
Compatible with
- 543-340B-10 – ABSOLUTE Digimatic ID-C digital indicator with calculation function Mitutoyo 543-340B-10, travel 12.7 mm, resolution 0.001 mm, flat back
- 543-590B-10 – ABSOLUTE Digimatic ID-C digital indicator with calculation function Mitutoyo 543-590B-10, travel 25.4 mm, resolution 0.001 mm, flat back
- 543-595B-10 – ABSOLUTE Digimatic ID-C digital indicator with calculation function Mitutoyo 543-595B-10, travel 50.8 mm, resolution 0.001 mm, flat back
Documentation
- Brochure: prit 1581 high performance abs digimatic
- Document: 11-10-87-catalog extract-comparatori absolute digimatic id c con
Price and availability
Models without a displayed price are offered with a configuration defined together with our technical support:contact us for a quote stating your application and measuring range.
Selection guide: Accessories for digital indicators
Contact point for inside chamfers, 90°, D=20-40mm – Mitutoyo 011447. Accessory listed in the Mitutoyo catalogue for: ABSOLUTE Digimatic ID-C digital indicators with calculation function.
Choose the digital indicator according to travel (20 - 40 mm) and resolution (0.01 or 0.001 mm): ID-S and ID-SX for routine inspection, ID-C for advanced functions (GO/NG tolerances, Max/Min/TIR, calculation), ID-F with a large backlit display, ID-H for high precision (0.0005 mm), ID-N/ID-B for compact applications. Check the back type (flat or lug) and the Ø8 mm stem for mounting on stands and fixtures.
If in doubt, contact us: our technical support will recommend the model, measuring range and accessories suited to your application.
Integration and programming
This model is without data output: the reading is taken from the display. If you need to record measurements on a PC, choose the "with data output" version of the same series, which can be connected via Digimatic cable or U-WAVE.
For integration into test stations, measuring fixtures or SPC software, our technical team will support you in choosing cables, receivers and software.
Calibration and repair
The instrument is supplied with Mitutoyo inspection certificate. For ISO 9001 / IATF quality systems, periodic calibration (typically annual) with a traceable certificate is recommended; RODER arranges it through accredited laboratories. Periodically check the smoothness of the stem and the repeatability on a gauge block; avoid impacts on the contact point.
After-sales service: RODER S.r.l. – INNOVACHECK division handles calibration with certificate (including ACCREDIA through partner laboratories), periodic verification and repairs of Mitutoyo instruments in Italy. Contact us stating the model and serial number.