Tramex Hygro-i2 relative humidity probes (HIPP) – reusable, ASTM F2170 in-situ tests
- SKU: HIPP1
- VENDOR: Tramex
Couldn't load pickup availability
Safe and secure payments:
Informazioni di prodotto e di utilizzo
Reusable Tramex Hygro-i2® probes for in-situ and hood-method relative humidity measurement in screeds, in accordance with ASTM F2170 and BS 8201, 8203, 5325. They connect to the CMEX5, MEX5 and Feedback Datalogger DL-RHTX.
Description
Tramex (Ireland) Hygro-i2® relative humidity probes allow in-situ and hood-method relative humidity tests compliant with BS 8201, 8203, 5325 and ASTM F2170 for the flooring industry, and are also suitable for flood restoration and indoor air quality. They stand out for their fast acclimatisation and temperature response, and for their accuracy even above 90% relative humidity.
Connected to the CMEX5, MEX5 or the Feedback Datalogger DL-RHTX, they measure relative humidity, temperature, dew point and grains per pound in structural materials such as screeds and walls, as well as ambient conditions in the building, all shown together on the same display. Unlike single-use probes, they are reusable, and their calibration can be verified with calibration salt checks.
Relative humidity sensor from 0 to 100%, accuracy ±2.0% from 0 to 99% at 25 °C, resolution 0.1%, drift < 0.25% per year; temperature sensor from -20 to 70 °C with accuracy ±0.1 °C and drift < 0.03 °C per year; PTFE film protecting against water and dust; NIST traceability. The probes are available in packs of 1, 3, 6, 12 and 25 (codes HIPP1, HIPP3, HIPP6, HIPP12, HIPP25).
Key features
- In-situ relative humidity tests to ASTM F2170
- Hood tests to BS 8201, 8203, 5325
- Reusable probes, verifiable with calibration salt checks
- Relative humidity from 0 to 100%
- Temperature from -20 to 70 °C
- For CMEX5, MEX5 and DL-RHTX
Typical applications
- Relative humidity tests in screeds before floor laying
- Restoration after water damage
- Indoor air quality
Compatible with
- Tramex MEX5
- Tramex CMEX5
- DL-RHTX
Documentation
Selection guide
Reusable Tramex Hygro-i2® probes for measuring relative humidity in situ and by the hood method in screeds, in accordance with ASTM F2170 and BS 8201, 8203, 5325. They connect to CMEX5, MEX5 and the Feedback Datalogger DL-RHTX.
Hygro-i2 probes and their accessories work only with Tramex MEX5, Tramex CMEX5, DL-RHTX. To get started with the ASTM F2170 test, choose the SP-F2170-B starter pack (3 probes, cable, calibration salt check, 12 hole liners); if you already have the instrument and cable, add HIPP probes and RHHL hole liners (Ø 19 mm, ASTM-compliant) or RHHLSR liners (Ø 16 mm, for non-ASTM tests); the HI-EX tool and HI-ACC toolbox make insertion and removal easier; SAL75 salts check the calibration of the probes.
If in doubt, contact us: our technical support team will recommend the right accessory for your instrument and application.
Integration and programming
The hole in the screed is drilled to the depth required by the standard (40% of the thickness for slabs drying from one side, 20% for slabs drying from both sides), cleaned, and fitted with the liner and cap; after acclimatisation, the Hygro-i2 probe is inserted; the reading is taken by connecting the RHIE2B cable to the instrument. With the Tramex Meters app you record position, date and values for the test report.
Calibration and repair
Hygro-i2 probes are reusable: check their calibration with the SAL75 calibration salt check (75% RH reference environment) before each test campaign and at least once a year. Liners and caps are consumables.
Service: RODER S.r.l. – INNOVACHECK division, Tramex distributor for Italy, will assist you with selection, use and sending instruments to Tramex for certified calibration and repairs. Contact us, stating the model and serial number of your instrument.
Aiuto nella scelta del prodotto
Do you have any questions? ...... Contact us!!!
