Replacement pins Tramex SP200 – 175 mm (2 pcs) for HH14SP200B electrode

Selection guide

Tramex SP200 pack of 2 spare 175 mm pins for the HH14SP200B heavy-duty electrode.

Pin probes connect only to the digital instruments Tramex MEX5, Tramex CMEX5 (pin mode for timber, plasterboard and WME); the ME5, CME5 and Skipper 5 have no probe input. Choose HH14TP30B for manual measurements on timber and floors, HA21SP52B (hammer-action) for beams and hardwood, and HH14SP90B and HH14SP200B with insulated pins for measuring at depth (90 or 200 mm) through plaster and insulation. Each electrode has its own spare pins: TG30/TP30 for HH14TP30B, SP52 for HA21SP52B, SP90 for HH14SP90B, SP200 for HH14SP200B.

If in doubt, contact us: our technical support team will recommend the right accessory for your instrument and application.

Integration and programming

Connect the probe to the dedicated socket on the instrument and select pin mode and the material (wood species or plasterboard) from the menu: the reading takes temperature correction into account and, with the Tramex Meters app, can be recorded and included in the report. Insulated pins measure only at the bare tip, and therefore at the depth reached.

Calibration and repair

Electrodes and pins do not require calibration: replace the pins when they are bent, worn or have damaged insulation, tightening them by hand without forcing. The instrument is checked using the calibration check box.

Service: RODER S.r.l. – INNOVACHECK division, Tramex distributor for Italy, will assist you with selection, use and sending instruments to Tramex for certified calibration and repairs. Contact us, stating the model and serial number of your instrument.