Interface cable Tramex RHIE2B – for Hygro-i2 probes

Selection guide

Tramex RHIE2B electronic interface cable for connecting Hygro-i® and Hygro-i2® probes to CMEX5, MEX5 and the Feedback Datalogger DL-RHTX.

Hygro-i2 probes and their accessories work only with Tramex MEX5, Tramex CMEX5, DL-RHTX. To get started with the ASTM F2170 test, choose the SP-F2170-B starter pack (3 probes, cable, calibration salt check, 12 hole liners); if you already have the instrument and cable, add HIPP probes and RHHL hole liners (Ø 19 mm, ASTM-compliant) or RHHLSR liners (Ø 16 mm, for non-ASTM tests); the HI-EX tool and HI-ACC toolbox make insertion and removal easier; SAL75 salts check the calibration of the probes.

If in doubt, contact us: our technical support team will recommend the right accessory for your instrument and application.

Integration and programming

The hole in the screed is drilled to the depth required by the standard (40% of the thickness for slabs drying from one side, 20% for slabs drying from both sides), cleaned, and fitted with the liner and cap; after acclimatisation, the Hygro-i2 probe is inserted; the reading is taken by connecting the RHIE2B cable to the instrument. With the Tramex Meters app you record position, date and values for the test report.

Calibration and repair

Hygro-i2 probes are reusable: check their calibration with the SAL75 calibration salt check (75% RH reference environment) before each test campaign and at least once a year. Liners and caps are consumables.

Service: RODER S.r.l. – INNOVACHECK division, Tramex distributor for Italy, will assist you with selection, use and sending instruments to Tramex for certified calibration and repairs. Contact us, stating the model and serial number of your instrument.