TESA-MODUL DM-4
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA TESA-MODUL DM-4 electronic interface.
Description
TESA-MODUL DM-4 electronic interface.
Use:
- DIN rail mounting
- Rugged, suitable for use in both the laboratory and production
- Compatible with all TESA display units
Functions:
- Adds further DIGIMATIC instruments for measuring with the display unit
- Connects to the display unit via a 9-pin Sub-D cable
- 4x DIGIMATIC connector
- Compatible with any type of instrument with a DIGIMATIC connection
Key features
- DIN rail mounting
- Rugged, suitable for use in both the laboratory and production
- Compatible with all TESA display units
- Adds further DIGIMATIC instruments for measuring with the display unit
- Connects to the display unit via a 9-pin Sub-D cable
Technical data
| Series | TESA-MODUL DM-4 |
| Compatibility | DIGIMATIC |
| Number of inputs | 4 |
| Dimensions [mm] | 41 x 107 x 77 |
| Dimensions [in] | 1.61 x 4.21 x 3.03 |
| Mass [kg] | 0.22 |
| Mass [g] | 220 |
| Maximum permissible errors | Depends on the connected instrument |
| Material | Housing: aluminium |
| Protection rating | IP40 |
| Power supply | Via TESA-BUS |
| Operating temperature | Temperature: 10 ÷ 40 °C; Humidity: RH < 80%, non-condensing |
| Working temperature | Temperature: 20 °C ± 1°; Humidity: 40 < RH < 65%, non-condensing |
| Connection | 9-pin Sub-D |
| Input(s) | 4 DIGIMATIC |
| Mounting | DIN rail |
Supplied with
TESA-MODUL DM-4 electronic interface · Declaration of conformity
Official manufacturer product page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide: TESA-MODUL DM-4
TESA TESA-MODUL DM-4 interface.
TESA TWIN display units: TWIN-T10 (1 input, portable), TWIN-T20 (2 axes), TWIN-T20 nano (HEIDENHAIN probes), TWIN-T20 ultimate and TWIN-T40 (4 axes) for inspection stations with TESA inductive probes; TT100 is the industrial multifunction display unit for dimensional measurements with multiple inputs. The TESA-MODUL interfaces and M4P-3 connect the probes to PCs, PLCs and acquisition systems (analogue output, half-bridge multiplexer, Digimatic, digital I/O, thermocouples). Choose according to the number of probes, the type of probe (TESA half-bridge, HEIDENHAIN, Digimatic) and the output required.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration and programming
TWIN and TT100 display units connect directly to TESA inductive probes (5-pin DIN connector); calculation formulas between axes, tolerances, zeroing and presets are set from the panel or the dedicated software. TESA-MODUL interfaces are configured via USB/RS232 and can be daisy-chained to add inputs; the M4P-3 provides analogue outputs for PLCs and acquisition boards. For integration into test benches, SPC and MES, our technical team supplies wiring diagrams and configuration examples.
Calibration and repair
Display units and interfaces are supplied with a declaration of conformity; the measuring chain (probe + display unit) is verified periodically with setting standards or reference gauge blocks and, on request, with a traceable calibration certificate. Firmware updates and repairs are carried out through our service department.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.