Heavy-duty xenon stroboscope Shimpo DT-3011N
This product is priced individually. Fill in the form to receive a dedicated quote.
Accessories available
Informazioni di prodotto e di utilizzo
Xenon stroboscope Shimpo DT-3011N for heavy-duty use, power supply 100–115 V AC, range 30–35,000 FPM, accuracy ±0.05% of reading, phase shift and external trigger.
Models in the series
| DT-3011N | Xenon stroboscope Shimpo DT-3011N for heavy-duty use, power supply 100–115 V AC, range 30–35,000 FPM, accuracy ±0.05% of reading, phase shift and external trigger. |
| DT-3011N-EU | Xenon stroboscope Shimpo DT-3011N-EU for heavy-duty use, power supply 230 V AC with European plug, range 30–35,000 FPM, accuracy ±0.05% of reading, phase shift and external trigger. |
| DT-3011N-KIT | Xenon stroboscope Shimpo DT-3011N-KIT for heavy-duty use, kit with spare lamp and carrying case, 100–115 V AC, range 30–35,000 FPM, accuracy ±0.05% of reading, phase shift and external trigger. |
| DT-3011N-KIT-EU | Xenon stroboscope Shimpo DT-3011N-KIT-EU for heavy-duty use, kit with spare lamp and carrying case, European plug, range 30–35,000 FPM, accuracy ±0.05% of reading, phase shift and external trigger. |
Description
The Shimpo DT-3011N stroboscope is a heavy-duty, mains-powered xenon instrument.
The stroboscope creates the illusion of "frozen motion": by adjusting the flash frequency, moving parts appear stationary or slowed down. It measures rotational speed (rpm) or reciprocating speed (strokes/min) with the same accuracy as an electronic digital tachometer. It is suitable for print inspection, motion analysis, preventive maintenance and measuring the speed of repetitive movements, and provides data on vibrating parts, leaks, spray jets and many industrial and scientific operations.
Aluminium construction, polished and focused reflector that eliminates shadow areas, external trigger input for synchronisation with the machine, programmable automatic lamp shut-off from 1 to 120 minutes, phase shift in degrees or ms, storage of 5 user settings, synchronous output to drive other stroboscopes, thread for tripod or fixed mounting.
Flash range 30.0–35,000 FPM, accuracy ±0.05% of reading, flash duration 20 µs, 6-digit red LED display, phase shift 0–359° (resolution 0.1°) or 0.00–1994.4 ms. Illuminance: at 20 cm 1950 lx at 1500 FPM and 2000 lx at 6000 FPM (illuminated diameter 203 mm); at 50 cm 725 lx at 1500 FPM and 850 lx at 6000 FPM (305 mm). Typical lamp life 1200 hours at 1500 FPM. Signal input: high level 2.5–12 V, low 0–0.5 V, pulse ≥50 µs, impedance ≥10 kΩ, range 27–35,020 FPM; sensor supply 12 V DC 40 mA. Temperature 0–40 °C, humidity 35–85% RH non-condensing. RoHS compliance. 1-year warranty.
Power supply 100–115 V AC ±10% 50/60 Hz (-EU versions: 200–240 V AC 50/60 Hz). Weight 1.2 kg.
Typical applications
- Predictive and preventive maintenance of motors, shafts and gears
- Gravure printing, packaging and textiles
- Inspection of moving parts without stopping production
Supplied with
Input signal connector · Upper and lower handle
Compatible accessories and spare parts
- SG-300 – Rubber front guard for stroboscopes Shimpo DT-3011N and DT-3015N
- CABLE-361-10FT – 3 m (10 ft) cascade synchronisation cable for stroboscopes Shimpo DT-3011N and DT-3015N
Documentation
- Catalogue: dt 3011n cat24 rev1
- Data sheet / dimensions: dt 3011n dimensional drawing
- User manual: dt 3011n man24 rev1
Price and availability
Models without a listed price are offered in a configuration defined together with our technical support team: contact us for a quote stating your application and measuring range.
Selection guide: DT-3011N
Shimpo DT-3011N xenon stroboscope for heavy-duty use, 100–115 V AC supply, range 30–35,000 FPM, accuracy ±0.05% of reading, phase shift and external trigger.
Available models: DT-3011N, DT-3011N-EU, DT-3011N-KIT, DT-3011N-KIT-EU.
Guide to the series: portable LED stroboscopes (DT-326B, DT-362, DT-366, ST-1100, ST-4000, ST-5100) are the choice for maintenance and inspection of moving parts, with a rechargeable battery and long LED life; xenon models (DT-311D, DT-3011N, DT-3015N, DT-735) offer the highest light intensity for brightly lit environments; NEMA 4X/IP65 versions (DT-3011J) are for humid and dusty environments; fixed ST-328 (xenon) and ST-329 (LED) arrays illuminate the full width of printing, packaging and textile machines; BL (black light) versions are used to check inks and UV markings.
Typical applications:
- Predictive and preventive maintenance of motors, shafts and gears
- Gravure printing, packaging and textiles
- Inspection of moving parts without stopping production
If in doubt, contact us: our technical support will recommend the right model and capacity for your application.
Integration and programming
The flash rate is set from the keypad or with the knob and read on the display; models with an external trigger input synchronise with a sensor (photocell, proximity) to automatically "freeze" the motion at the real speed of the machine, with phase shift adjustment.
The ST-328/ST-329 bars are installed on the machine using the supplied brackets and controlled from the remote control unit; versions with 100-120 V or 220-240 V supply. For integration with encoders or machine signals, our technical team will support you in choosing cables, sensors and adapters.
Calibration and repair
Shimpo stroboscopes are calibrated at the factory and frequency accuracy is ensured by the quartz oscillator. On request we supply the frequency calibration certificate with traceability. Xenon lamps, batteries, cables and rubber guards are available as original spare parts.
Service: RODER S.r.l. – INNOVACHECK division handles calibration with certificate, periodic verification and repairs of Shimpo instruments in Italy. Contact us, stating the model and serial number.