TESA extensions
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA extension for dial indicator contact points, M2.5 mounting, length 15 mm.
Description
M2.5 extension, L = 15 mm.
TESA extension for dial indicator contact points.
Technical data. Mounting M2.5; length 15 mm.
Main data: Mounting (mm) M2.5; Diameter (mm) 4; Probe length (mm) 15. TESA code 03540502.
Key features
- Mounting: M2.5 mm
- Diameter: 4 mm
- Probe length: 15 mm
Models and variants
| TESA code | Item | Mounting [mm] | Diameter [mm] | Probe length [mm] | Mass [kg] |
|---|---|---|---|---|---|
| 03540502 | Extension for contact points for axial probes, Ø 4, L = 15 mm | M2.5 | 4 | 15 | 0.002 |
| 03560042 | Extension Ø 5 / L 10 mm | M2.5 | 5 | 10 | 0.002 |
| 03560044 | Extension Ø 5 / L 20 mm | M2.5 | 5 | 20 | 0.003 |
| 03560045 | Extension Ø 5 / L 25 mm | M2.5 | 5 | 25 | 0.004 |
| 03560048 | Extension Ø 5 / L 40 mm | M2.5 | 5 | 40 | 0.007 |
| 03560050 | Extension Ø 5 / L 50 mm | M2.5 | 5 | 50 | 0.008 |
| 03540501 | Extension for contact points for axial probes, Ø 4, L = 10 mm | M2.5 | 4 | 10 | 0.001 |
| 03540504 | Extension for contact points for axial probes, Ø 4, L = 40 mm | M2.5 | 4 | 40 | 0.004 |
| 03540505 | Extensions for contact points, M2 thread, length: 10 mm | M2 | 3.5 | 10 | 0.006 |
| 03540506 | Extensions for contact points, M2 thread, length: 12 mm | M2 | 3.5 | 15 |
Documentation
- Document: 15-08-40-catalog extract-prolunghe contatto con superficie di mis
- Document: 12-02-35-catalog extract-prolunghe adattatori cat misuratori vert
Official manufacturer product page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide
TESA extension for dial indicator contact points, M2.5 mounting, length 15 mm.
Check compatibility with your probe or display unit (series, contact point thread, shank diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, probes for FMS are mounted on dedicated probe holders, springs and bellows are series-specific.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration
Original TESA accessory: fits without modifications to the instrument. After replacing contact points, springs or extensions, carry out zeroing and, if the display unit provides for it, recalibration of the gain factor.
Calibration and repair
Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.