Medium-temperature ultrasonic couplant paste, 170 g – PST-ACC-MHT
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
Special paste for medium-temperature ultrasonic coupling, from -30 to +300 °C. Non-flammable, smoke-free, RCCM compliant. 170 g pack.
Key features
- Ultrasonic couplant paste
- Operating temperature -30 – +300 °C
- Non-flammable, smoke-free
- 170 g pack
- RCCM compliant
Description
Special paste for medium-temperature ultrasonic coupling, from -30 to +300 °C. Non-flammable, smoke-free, RCCM compliant. 170 g pack. The couplant removes the air layer between transducer and workpiece, which would otherwise reflect almost all of the ultrasonic signal, and ensures stable, repeatable readings. Clean the surface and apply a generous drop; for comparative measurements keep the quantity and settling time constant. Do not use oil or grease as a couplant.
Typical applications
- Thickness measurement with dual element transducers
- Precision measurement with single element transducers
- Flaw detection with shear wave transducers and wedges
- Bolt tension measurement
- High-temperature measurements on steam plants, heat exchangers and furnaces (with a suitable transducer)
Technical data
| Form | Paste |
| Features | Non-flammable, smoke-free |
| Content | 170 g |
| Operating temperature | -30 – +300 °C |
| Compliance | RCCM |
| Product code | PST-ACC-MHT |
Supplied with
- 170 g pack
Technical details on innovacheck.com
Price and availability
The price for this product is provided on request: contact us for a quote, stating quantity and application.
Selection guide: which couplant
The couplant is chosen according to the surface temperature of the part to be inspected: standard gel for measurements at room temperature; extended-temperature gel for cold or moderately hot surfaces; high and very high temperature paste for pipework, boilers and plant in operation. The temperature range of each product is given in the Technical data.
On hot surfaces also use a high-temperature transducer and limit the contact time.
Integration and programming
Clean the surface and apply enough couplant to fill the gap between the transducer and the part; for comparative measurements, keep the quantity and settling time constant. Do not use oil or grease in place of the couplant. After measuring, remove any residue from the transducer.
Calibration and repair
Consumable: keep the container closed, protected from frost and heat. For thickness gauge calibration, use the same couplant intended for the measurements.
Service: RODER S.r.l. – INNOVACHECK division handles calibration with certificate, periodic verification and repair of Dakota NDT thickness gauges in Italy, in cooperation with the manufacturer. Contact us with the model and serial number.

