M4P-3 module TESA
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA M4P-3 interface with 4 probe inputs and analogue output in V/mm, for PLC or PC, DIN rail mounting.
Description
TESA – M4P-3 interface. Connection to a PC via an A/D converter; can be connected to a programmable PLC; quick and easy integration on a DIN rail; interfaces can be linked together (maximum 10) with a common power supply; analogue signal output in V/mm: converts the probe signal into a DC voltage for fast measurements.
Technical data. Inputs 4 probe inputs; Maximum permissible errors gain 1: ± (1% of measured value + 1 µm); gain > 1: ± (1.5% of measured value + 1 µm); Gain 1 V/mm (standard), 2.5, 5 or 10 V/mm; Dimensions 75 x 155 x 40 mm; IP protection rating IP40; Mass 400 g; Data output Sub-D 9p/f; Operating temperature 0 ÷ 40 °C; Mounting on DIN rail 35 x 7.5 mm.
Key features
- 4 probe inputs
- Analogue output in V/mm
- DIN rail mounting
- Can be connected to a PLC
Typical applications
- Connecting probes to a PLC or PC via an A/D converter
Technical data
| Data output | Sub-D 9p/f |
| Mass [kg] | 0.4 |
| Mass [g] | 400 |
| Maximum permissible errors | Gain = 1: ± (1% of measured value + 1 µm); Gain > 1: ± (1.5% of measured value + 1 µm) |
| IP protection rating | IP40 |
| Data output(s) | Sub-D 9p/f |
| Dimensions | 75 x 155 x 40 mm |
| Mass | 400 g |
| Operating temperature | 0 ÷ 40 °C |
| Input(s) | 4 probe inputs |
| Mounting | On DIN rail 35 x 7.5 mm |
Compatible accessories
- 03160016 – EU power cable, 2 m
- 03160015 – CH power cable, 2 m
- 03160017 – Power cable without plug, 2 m
Documentation
- Document: 12-02-48-catalog extract-m4p 3 interface cat gen en p340
- Datasheet / dimensions: info prodotto tesa m4p 3 it
Manufacturer's official page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote, stating the model, quantity and application.
Selection guide: TESA M4P-3 module
TESA M4P-3 interface with 4 probe inputs and analogue output in V/mm, for PLC or PC, DIN rail mounting.
TESA TWIN display units: TWIN-T10 (1 input, portable), TWIN-T20 (2 axes), TWIN-T20 nano (HEIDENHAIN probes), TWIN-T20 ultimate and TWIN-T40 (4 axes) for inspection stations with TESA inductive probes; TT100 is the industrial multifunction display unit for dimensional measurement with multiple inputs. The TESA-MODUL and M4P-3 interfaces connect probes to PCs, PLCs and data acquisition systems (analogue output, half-bridge multiplexer, Digimatic, digital I/O, thermocouples). Choose according to the number of probes, the probe type (TESA half-bridge, HEIDENHAIN, Digimatic) and the output required.
If in doubt, contact us: our technical support will advise the model, measuring force, contact points and display unit suited to your application.
Integration and programming
TWIN and TT100 display units connect directly to TESA inductive probes (5-pin DIN connector); calculation formulas between axes, tolerances, zero setting and presets are set from the panel or with the dedicated software. TESA-MODUL interfaces are configured via USB/RS232 and can be daisy-chained to add inputs; the M4P-3 provides analogue outputs for PLCs and data acquisition cards. For integration into test benches, SPC and MES, our technical team provides wiring diagrams and configuration examples.
Calibration and repair
Display units and interfaces are supplied with a declaration of conformity; the measuring chain (probe + display unit) should be verified periodically with setting standards or reference gauge blocks and, on request, with a traceable calibration certificate. Firmware updates and repairs are carried out through our service department.
Support: RODER S.r.l. – INNOVACHECK division handles verification, certified calibration and repairs of TESA probes and display units in Italy. Contact us, stating the model and serial number.