Electronic interface for TESA probes - BPX series
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA BPX44 electronic interface for connecting probes to a PC via USB, with TIS software.
Description
TESA – BPX interface. Direct connection to the USB port of a computer; «Stand Alone» operating mode; modular design: several BPX units can be linked together to increase the number of probes; high immunity to environmental and electrical disturbances and to solid or liquid contaminants; TIS software included in the supply, with tolerances, +A, -A, +A+B, +A-B functions and export to .csv.
Technical data. Maximum permissible errors, digital output ± (0.05 + 0.15% of the measuring range); Housing material: aluminium; Dimensions 55 x 172 x 155 mm; Protection rating IP40; Mass 1 kg; Data output 3 x USB 2.0; Zero and sensitivity drift ≤ 0.05% / °C; Acquisition time 10 ms between 2 consecutive measurements; 1 ms synchronisation window; Power supply 115 ÷ 230 V, 50 ÷ 60 Hz.
Key features
- Direct USB connection to the PC
- Stand Alone operating mode
- Interfaces can be linked together
- TIS software included
Supplied with
Interface · TIS software
Documentation
Price and availability
Products without a listed price are offered with a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide: Electronic interface for TESA probes - BPX Series
TESA BPX44 electronic interface for connecting probes to a PC via USB, with TIS software.
TESA TWIN display units: TWIN-T10 (1 input, portable), TWIN-T20 (2 axes), TWIN-T20 nano (HEIDENHAIN probes), TWIN-T20 ultimate and TWIN-T40 (4 axes) for inspection stations with TESA inductive probes; TT100 is the industrial multifunction display unit for dimensional measurements with multiple inputs. The TESA-MODUL interfaces and M4P-3 connect the probes to PCs, PLCs and acquisition systems (analogue output, half-bridge multiplexer, Digimatic, digital I/O, thermocouples). Choose according to the number of probes, the type of probe (TESA half-bridge, HEIDENHAIN, Digimatic) and the output required.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration and programming
TWIN and TT100 display units connect directly to TESA inductive probes (5-pin DIN connector); calculation formulas between axes, tolerances, zeroing and presets are set from the panel or the dedicated software. TESA-MODUL interfaces are configured via USB/RS232 and can be daisy-chained to add inputs; the M4P-3 provides analogue outputs for PLCs and acquisition boards. For integration into test benches, SPC and MES, our technical team supplies wiring diagrams and configuration examples.
Calibration and repair
Display units and interfaces are supplied with a declaration of conformity; the measuring chain (probe + display unit) is verified periodically with setting standards or reference gauge blocks and, on request, with a traceable calibration certificate. Firmware updates and repairs are carried out through our service department.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.