Ball contact points – for FMS probes TESA
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA Ø 4 mm ball probe, carbide, Ø 3 mm, L = 20 mm – diameter 3 mm; material carbide; mass 2 g.
Description
Ø 4 mm ball probe, carbide, Ø 3 mm, L = 20 mm.
TESA Ø 4 mm ball probe, carbide, Ø 3 mm, L = 20 mm, manufactured by TESA Technology (Switzerland).
Technical data: Diameter [mm]: 3; Material: Carbide; Mass [g]: 2; Probe length [mm]: 20; Mounting [mm]: Ø 4.
Key features
- Diameter: 3 mm
- Material: Carbide
- Mass: 2 g
- Probe length: 20 mm
- Mounting: Ø 4 mm
Technical data
| Material | Carbide |
Models and variants
| TESA code | Item | Mounting [mm] | Diameter [mm] | Probe length [mm] | Mass [kg] |
|---|---|---|---|---|---|
| 02660076 | Ball contact points Ø 3 mm, Ø 4 mm mounting shank, L=20 mm, for FMS probes | Ø 4 | 3 | 20 | 0.002 |
| 02660077 | Ball contact points Ø 3 mm, Ø 4 mm mounting shank, L=40 mm, for FMS probes | Ø 4 | 3 | 40 | 0.004 |
| 02660078 | Ball contact points Ø 3 mm, Ø 4 mm mounting shank, L=60 mm, for FMS probes | Ø 4 | 3 | 60 | 0.005 |
| 02660079 | Ball contact points Ø 5 mm, Ø 4 mm mounting shank, L=20 mm, for FMS probes | Ø 4 | 5 | 20 | 0.003 |
| 02660080 | Ball contact points Ø 5 mm, Ø 4 mm mounting shank, L=40 mm, for FMS probes | Ø 4 | 5 | 40 | 0.005 |
| 02660081 | Ball contact points Ø 5 mm, Ø 4 mm mounting shank, L=60 mm, for FMS probes | Ø 4 | 5 | 60 | 0.007 |
| 02660084 | Ball contact points Ø 5 mm offset, Ø 4 mm mounting shank, L=20 mm, for FMS probes | Ø 4 | 5 | 20 | 0.006 |
| 02660085 | Ball contact points Ø 5 mm offset, Ø 4 mm mounting shank, L=33 mm, for FMS probes | Ø 4 | 5 | 33 | 0.006 |
| 00760058 | Ball probes Ø 3 mm, L=55 mm, Ø 6 mm mounting shank, for FMS probes | Ø 6 | 3 | 55 | 0.281 |
| 00760059 | Ball probes Ø 5 mm, L=56 mm, Ø 6 mm mounting shank, for FMS probes | Ø 6 | 5 | 56 | 0.9 |
Documentation
- Document: 15-09-17-catalog extract-numerical index index 3 cat gen en p481
- Document: 15-09-17-catalog extract-offset inserts ball tip inserts cat gen
- Document: 15-09-25-catalog extract-numerical index index 1 cat gen en p479
Manufacturer's official page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote, stating the model, quantity and application.
Selection guide
TESA Ø 4 mm ball probe, carbide, Ø 3 mm, L = 20 mm – diameter 3 mm; material carbide; mass 2 g.
Please check compatibility with your probe or display unit (series, contact point thread, stem diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, FMS probes are fitted to dedicated probe holders, and springs and bellows are series-specific.
If in doubt, contact us: our technical support will advise the model, measuring force, contact points and display unit suited to your application.
Integration
Original TESA accessory: it fits without any modification to the instrument. After replacing contact points, springs or extensions, perform zero setting and, if the display unit provides for it, recalibrate the gain factor.
Calibration and repair
Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.
Support: RODER S.r.l. – INNOVACHECK division handles verification, certified calibration and repairs of TESA probes and display units in Italy. Contact us, stating the model and serial number.