TESA TT100 display unit
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA TT100 multifunction industrial display unit for dimensional measurement.
Description
TT100 multifunction industrial display unit for dimensional measurement.
Display unit:
- Large high-contrast display for clear, immediate reading
- Touch screen
- Adjustable stand
Use:
- Rugged, suitable for use in both the laboratory and production
- 4 different display types
- SPC functions: Gaussian, drift, Pareto
- Internal memory for up to 30,000 values
- TESA-MODUL connection for adding sensors and functions
- Clear interface for simple, straightforward learning
Functions:
- 32 values displayed simultaneously
- 99 sensor inputs handled simultaneously
- Presetting to the setting value to make measuring to the drawing dimensions easier
- Storage of MAX, MIN or MAX-MIN values during dynamic measurements
- 16 tolerance classes available
- Mathematical functions (dimensions calculated from other dimensions, trigonometry)
- Jack footswitch input for assigning an action to the display unit
- Programmable key on the measuring screen for assigning an action to the display unit
Data management:
- Sending multiple measurements to the computer via PC port (driverless HID type)
- Sending multiple measurements to the computer via RS232 port (ASCII commands and Modbus protocol)
Key features
- Touch screen
- Adjustable stand
- Rugged, suitable for use in both the laboratory and production
- 4 different display types
- SPC functions: Gaussian, drift, Pareto
Technical data
| Series | TT |
| Circular scale | Yes |
| Analogue division value [µm] | 1 ÷ 1000 |
| Numerical division value [µm] | 0.1 |
| Number of classes | Max. 32 classes via TESA-MODUL IO-8 |
| Mass [kg] | 1.2 |
| Mass [g] | 1200 |
| Maximum permissible errors | Depends on the TESA-MODUL used |
| Material | Housing: aluminium |
| Protection rating | Front panel: IP65 |
| Power supply | 100 ÷ 240 V, 50 ÷ 60 Hz, 0.6 A |
| Data output(s) | RS232, HID |
| Units | mm / in |
| Dimensions | Housing: 200 x 130 x 145 mm; Display: 155 x 90 mm |
| Mass | 1.2 kg |
| Operating temperature | Temperature: 10 ÷ 40 °C; Humidity: RH < 80 %, non-condensing |
| Working temperature | Temperature: 20 °C ± 1°; Humidity: 40 < RH < 65%, non-condensing |
| Input(s) | TESA-BUS input for connecting probes (via TESA-MODUL) |
| Sampling rate | Depends on the TESA-MODUL used |
Supplied with
TT100 display unit · Power supply + EU, UK, US and CH cables · Self-test report
Documentation
Official manufacturer product page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide: TT100 display unit TESA
TESA TT100 industrial multifunction display unit for dimensional measurements.
TESA TWIN display units: TWIN-T10 (1 input, portable), TWIN-T20 (2 axes), TWIN-T20 nano (HEIDENHAIN probes), TWIN-T20 ultimate and TWIN-T40 (4 axes) for inspection stations with TESA inductive probes; TT100 is the industrial multifunction display unit for dimensional measurements with multiple inputs. The TESA-MODUL interfaces and M4P-3 connect the probes to PCs, PLCs and acquisition systems (analogue output, half-bridge multiplexer, Digimatic, digital I/O, thermocouples). Choose according to the number of probes, the type of probe (TESA half-bridge, HEIDENHAIN, Digimatic) and the output required.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration and programming
TWIN and TT100 display units connect directly to TESA inductive probes (5-pin DIN connector); calculation formulas between axes, tolerances, zeroing and presets are set from the panel or the dedicated software. TESA-MODUL interfaces are configured via USB/RS232 and can be daisy-chained to add inputs; the M4P-3 provides analogue outputs for PLCs and acquisition boards. For integration into test benches, SPC and MES, our technical team supplies wiring diagrams and configuration examples.
Calibration and repair
Display units and interfaces are supplied with a declaration of conformity; the measuring chain (probe + display unit) is verified periodically with setting standards or reference gauge blocks and, on request, with a traceable calibration certificate. Firmware updates and repairs are carried out through our service department.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.