TESA-MODUL TP
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA TESA-MODUL TP interface for temperature measurement.
Description
TESA-MODUL TP interface for temperature measurement.
Use:
- DIN rail mounting
- Rugged, for use in both the laboratory and production
- Compatible with all TESA display units
Functions:
- Temperature measurement
- Ambient temperature monitoring (not compatible with TT100)
- Connection to the display unit via Sub-D 9p cable
- Type K and type PT 100/1000 connector
- Type K thermocouple, AISI 310, included
Key features
- DIN rail mounting
- Rugged, for use in both the laboratory and production
- Compatible with all TESA display units
- Temperature measurement
- Ambient temperature monitoring (not compatible with TT100)
Technical data
| Series | TESA-MODUL |
| Compatibility | Type K and type PT 100/1000 |
| Dimensions [mm] | 41 x 57 x 77 |
| Dimensions [in] | 1.61 x 2.24 x 3.03 |
| Mass [kg] | 0.15 |
| Mass [g] | 150 |
| Maximum permissible errors | 0.5 °C |
| Material | Housing: aluminium |
| Protection rating | IP40 |
| Power supply | Via TESA-BUS |
| Operating temperature | Temperature: 10 ÷ 40 °C; Humidity: RH < 80%, non-condensing |
| Operating temperature | Temperature: 20 °C ± 1°; Humidity: 40 < RH < 65%, non-condensing |
| Coupling | Sub-D 9p |
| Mounting | DIN rail |
Supplied with
TESA-MODUL TP interface · Temperature probe · Declaration of conformity
Official manufacturer data sheet: tesatechnology.com
Price and availability
Products without a listed price are offered with a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide: TESA-MODUL TP
TESA TESA-MODUL TP interface for temperature measurement.
TESA TWIN display units: TWIN-T10 (1 input, portable), TWIN-T20 (2 axes), TWIN-T20 nano (HEIDENHAIN probes), TWIN-T20 ultimate and TWIN-T40 (4 axes) for inspection stations with TESA inductive probes; TT100 is the industrial multifunction display unit for dimensional measurements with multiple inputs. The TESA-MODUL interfaces and M4P-3 connect the probes to PCs, PLCs and acquisition systems (analogue output, half-bridge multiplexer, Digimatic, digital I/O, thermocouples). Choose according to the number of probes, the type of probe (TESA half-bridge, HEIDENHAIN, Digimatic) and the output required.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration and programming
TWIN and TT100 display units connect directly to TESA inductive probes (5-pin DIN connector); calculation formulas between axes, tolerances, zeroing and presets are set from the panel or the dedicated software. TESA-MODUL interfaces are configured via USB/RS232 and can be daisy-chained to add inputs; the M4P-3 provides analogue outputs for PLCs and acquisition boards. For integration into test benches, SPC and MES, our technical team supplies wiring diagrams and configuration examples.
Calibration and repair
Display units and interfaces are supplied with a declaration of conformity; the measuring chain (probe + display unit) is verified periodically with setting standards or reference gauge blocks and, on request, with a traceable calibration certificate. Firmware updates and repairs are carried out through our service department.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.