TESA hemispherical contact points
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA contact point for dial indicators: hemispherical contact point, M2 mounting, carbide.
Description
M2 hemispherical contact point, carbide, R = 5 mm, L = 16 mm.
TESA contact point for dial indicators: hemispherical contact point.
Technical data. Mounting M2; radius 5 mm; probe length 16 mm; diameter 1.5 mm; material carbide.
Key features
- Material: Carbide
- Mounting: M2 mm
- Diameter: 1.5 mm
- Probe length: 16 mm
- Radius: 5 mm
Models and variants
| TESA code | Item | Material | Mounting [mm] | Diameter [mm] | Probe length [mm] |
|---|---|---|---|---|---|
| 03510202 | Contact points with spherical measuring surface, M2 thread, R = 5 mm, length: 16 mm | Carbide | M2 | 1.5 | 16 |
| 03560018 | Spherical contact point, carbide, R 16, L 6 mm | Carbide | M2.5 | 10 | 6 |
| 03560020 | Long spherical contact point, carbide, R 1.5, L 8 mm | Carbide | M2.5 | 8 | 8 |
| 03560035 | Spherical contact point, steel, R 0.5, L 5 mm | Steel | M2.5 | 5 | 5 |
| 03560038 | Spherical contact point, steel, R 0.5, L 20 mm | Steel | M2.5 | 5 | 20 |
| 03560039 | Spherical contact point, steel, R 0.5, L 30 mm | Steel | M2.5 | 5 | 30 |
| 03510001 | Standard contact points with steel spherical measuring surface, R = 1.5 mm / L = 6 mm | Steel | M2.5 | 5 | 6 |
| 03510002 | Standard contact points with carbide spherical measuring surface, R = 1.5 mm / L = 6 mm | Carbide | M2.5 | 5 | 6 |
| 03510102 | Cylindrical contact points with carbide spherical measuring surface, R = 5 mm / L = 6 mm | Carbide | M2.5 | 5 | 6 |
| 03510103 | Contact points with spherical measuring surface, M2 thread, R5 | Carbide | M2 | 4 | 3 |
Documentation
- Document: 15-30-38-catalog extract-contatti emisferici cat misuratori verti
- Document: 15-30-38-catalog extract-contatto emisferico con 4 spine intercam
Official manufacturer product page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide
TESA contact point for dial indicators: hemispherical contact, M2 mounting, material carbide.
Check compatibility with your probe or display unit (series, contact point thread, shank diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, probes for FMS are mounted on dedicated probe holders, springs and bellows are series-specific.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration
Original TESA accessory: fits without modifications to the instrument. After replacing contact points, springs or extensions, carry out zeroing and, if the display unit provides for it, recalibration of the gain factor.
Calibration and repair
Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.