TESA barrel-type probes
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA Ø 9.7 mm cylindrical probe for height gauges, Ø 6 mm mounting.
Description
Ø 6 mm barrel-type probe, carbide, Ø 9.7 mm, L = 62.5 mm.
Cylindrical probe for measuring features that are difficult to measure with a ball probe, also for threaded features and for determining the centre of threaded holes.
Technical data. Diameter 9.7 mm; Probe length 62.5 mm; Mounting Ø 6 mm; Material: carbide.
Key features
- Material: Carbide
- Mounting: Ø 6 mm
- Diameter: 9.7 mm
- Probe length: 62.5 mm
Technical data
| Material | Carbide |
| Mounting [mm] | Ø 6 |
Models and variants
| TESA code | Item | Diameter [mm] | Probe length [mm] | Mass [kg] | Mass [g] |
|---|---|---|---|---|---|
| 00760068 | Barrel-shaped probes for Ø 9.7 mm holes, mounting shank Ø 6 mm, for FMS probes | 9.7 | 62.5 | 0.023 | 23 |
| 00760066 | Barrel-shaped probes for Ø 2.2 mm holes, mounting shank Ø 6 mm, for FMS probes | 2.2 | 57.5 | 0.1 | 100 |
| 00760067 | Barrel-shaped probes for Ø 4.5 mm holes, mounting shank Ø 6 mm, for FMS probes | 4.5 | 60 | 0.1 | 100 |
Documentation
- Document: 15-09-34-catalog extract-set di tastatori cat misuratori vertical
- Document: 15-09-34-catalog extract-tastatori cilindrici o a botte cat misur
Official manufacturer data sheet: tesatechnology.com
Price and availability
Products without a listed price are offered with a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide
TESA Ø 9.7 mm cylindrical probe for height gauges, Ø 6 mm mounting.
Check compatibility with your probe or display unit (series, contact point thread, shank diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, probes for FMS are mounted on dedicated probe holders, springs and bellows are series-specific.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration
Original TESA accessory: fits without modifications to the instrument. After replacing contact points, springs or extensions, carry out zeroing and, if the display unit provides for it, recalibration of the gain factor.
Calibration and repair
Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.