TESA GTL 21 USB probe ± 2 mm
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA GTL21 probe, USB, ± 2 mm, force = 0.63 N, axial cable – measuring range ± 2 mm; maximum permissible errors 0.4 + 2.4 x (L x L) µm; repeatability limit 0.1 µm.
Description
TESA GTL21 probe, USB, ± 2 mm, force = 0.63 N, axial cable, manufactured by TESA Technology (Switzerland), «GTL21 USB probe, ± 2 mm, plunger travel 4.3 mm, axial cable» family.
Technical data: Measuring range [mm]: ± 2; Maximum permissible errors [µm]: 0.4 + 2.4 x (L x L); Repeatability limit [µm]: 0.1; Hysteresis [µm]: 0.5; Measuring force [N]: 0.63; Protection rating: IP65; Mass [g]: 158; Plunger lift: Mechanical; Protective bellows: Viton®; Cable orientation: Axial; Cable length [m]: 2.9; Series: GTL21.
Key features
- Measuring range: ± 2 mm
- Repeatability limit: 0.1 µm
- Hysteresis: 0.5 µm
- Measuring force: 0.63 N
- Protection rating: IP65
- Mass: 158 g
- Plunger lift: Mechanical
Technical data
| Series | GTL21 |
| Measuring range [mm] | ± 2 |
| Maximum permissible errors [µm] | 0.4 + 2.4 x (L x L) |
| Repeatability limit [µm] | 0.1 |
| Protection rating | IP65 |
| Hysteresis [µm] | 0.5 |
| Measuring force [N] | 0.63 |
| Plunger lift | Mechanical |
| Protective bellows | Viton® |
| Cable orientation | Axial |
| Cable length [m] | 2.9 |
| Mass [kg] | 0.158 |
| Mass [g] | 158 |
| Standard | DIN 32876 |
| Maximum permissible errors | L in mm; 0.4 + 2.4 x (L x L) µm |
| Material | Mounting shank: nickel-plated; Plunger: hardened steel; Protective bellows: Viton®; Ball contact point: carbide |
| Dimensions | Mounting shank: Ø 8 mm; Contact point thread: M2.5; Ball contact point: Ø 3 mm; Cable: 2.9 m; Connector: USB type A |
| Mass | Moving mass: 6 g |
| Hysteresis | 0.5 µm |
| Coefficient of linear expansion | 0.2 µm/°C |
| Repeatability | 0.1 µm |
| Measuring range | ± 2 mm |
| Plunger travel | 4.3 mm |
| Rest position | Factory setting: -1.2 mm; Adjustable: -2.2 ÷ 0.1 mm |
| Working temperature | 20 °C ± 0.5 |
| Sensitivity | 73.75 mV/V/mm |
Supplied with
Probe · Adjustment key · Inspection report · Instruction manual · Declaration of conformity
Documentation
- Document: 15-30-00-catalog extract-fms probes usb dc axial probes neutral a
- Document: 15-30-00-catalog extract-gtl21 usb probe 2 mm 4 3 mm bolt travel
- Document: 15-30-00-catalog extract-numerical index index 3 cat gen en p481
- Document: article tesa ubs probes it
Official manufacturer product page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide: USB probe ± 2 mm GTL 21 USB TESA
TESA GTL21 probe, USB, ± 2 mm, force = 0.63 N, axial cable – measuring range ± 2 mm; maximum permissible errors 0.4 + 2.4 x (L x L) µm; repeatability limit 0.1 µm.
TESA inductive probes (half-bridge system) are selected according to measuring range (± 1, ± 2, ± 5 mm), measuring force (from 0.16 to 4 N depending on the material and finish of the workpiece), cable exit (axial or radial, depending on the space available in the fixture) and plunger lift (manual or pneumatic, GTx2 and GTLx2 versions). The GTL versions are linearised for maximum accuracy over the whole range; the DC versions have a voltage analogue output for PLCs; the USB versions connect directly to a PC without a display unit; the FMS parallel-guided probes are for measurements with constant force and interchangeable probes; lever probes are for hard-to-reach points. The probe must be paired with a display unit (TWIN, TT100) or an interface (M4P-3, TESA-MODUL) and with suitable contact points.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration and programming
The probe is fixed by its Ø 8 mm h6 shank in the holder or measuring fixture and connected to the display unit or interface via the 5-pin DIN connector (or USB for the USB versions, voltage output for the DC versions). Zeroing, presets, tolerances and formulas between several probes are set on the display unit; with M4P-3 and TESA-MODUL the signals go to PLCs, acquisition boards and SPC software. Probes with pneumatic plunger lift require the pneumatic accessories (electropneumatic pump, fittings) listed among the accessories.
Calibration and repair
Every TESA probe is supplied with an inspection report and a declaration of conformity. Periodic verification on gauge blocks or setting standards is recommended and, for quality systems, calibration with a traceable certificate; replace worn contact points and damaged bellows. After impacts or unstable readings the probe should be sent in for service.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.