TESA protective bellows for electronic probes
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA Viton® bellows, travel 4.3 mm, for GTL21, GTL211, GTL22 – special feature 1 for GTL21, GTL211, GTL22; mass 1 g.
Description
Viton® bellows, travel 4.3 mm, for GTL21, GTL211, GTL22.
TESA Viton® bellows, travel 4.3 mm, for GTL21, GTL211, GTL22, manufactured by TESA Technology (Switzerland).
Technical data: Special feature 1: For GTL21, GTL211, GTL22; Mass [g]: 1.
Key features
- Special feature 1: For GTL21, GTL211, GTL22
- Mass: 1 g
Technical data
| Material | Nitrile: resistant elastomer, for normal operating conditions; Viton®: highly resistant fluoroelastomer, for conditions involving constant contact with coolants or lubricants |
Models and variants
| TESA code | Item | Special feature 1 | Mass [kg] | Mass [g] |
|---|---|---|---|---|
| 03260470 | Viton bellows for 4.3 mm plunger travel for GT 21, GT 22, GTL 21, 211, 22 | For GTL21, GTL211, GTL22 | 0.001 | 1 |
| 03260468 | Nitrile bellows for 4.3 mm plunger travel for GT 21, GT 22, GTL 21, 211, 22 | For GT21, GT22 | 0.002 | 2 |
| 03260489 | Viton bellows for pneumatic probes for 4.3 mm plunger travel, for GTL 212, 222 | For GTL212, GTL222 | 0.003 | 3 |
| 03260491 | Viton bellows for 10.3 mm plunger travel, for GT 27, 271, 28, 61, 611, 62 | For GT27, GT271, GT28, GT61, GT611, GT62 | 0.004 | 4 |
| 03260490 | Viton bellows for pneumatic probes for 10.3 mm plunger travel, for GT 272, 282, 612, 622 | For GT272, GT282, GT612, GT622 | 0.003 | 3 |
Documentation
- Document: 15-08-90-catalog extract-numerical index index 3 cat gen en p481
- Document: 15-08-90-catalog extract-spring sets for measuring probes protect
Official manufacturer product page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide
TESA Viton® bellows, travel 4.3 mm, for GTL21, GTL211, GTL22 – special feature(s) 1 For GTL21, GTL211, GTL22; mass 1 g.
Check compatibility with your probe or display unit (series, contact point thread, shank diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, probes for FMS are mounted on dedicated probe holders, springs and bellows are series-specific.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration
Original TESA accessory: fits without modifications to the instrument. After replacing contact points, springs or extensions, carry out zeroing and, if the display unit provides for it, recalibration of the gain factor.
Calibration and repair
Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.