TESA spring sets for electronic probes
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA spring set for GT21, GT22, force = 1 N – measuring force 1 N; special feature 1 for GT21, GT22; mass 1 g.
Description
Spring set for GT21, GT22, force = 1 N.
TESA spring set for GT21, GT22, force = 1 N, manufactured by TESA Technology (Switzerland).
Technical data: Measuring force [N]: 1; Special feature 1: For GT21, GT22; Mass [g]: 1.
Key features
- Measuring force: 1 N
- Special feature 1: For GT21, GT22
- Mass: 1 g
Models and variants
| TESA code | Item | Measuring force [N] | Special feature 1 | Mass [kg] | Mass [g] |
|---|---|---|---|---|---|
| 03260422 | Springs for GT 21-22 / F = 1.00 N | 1 | For GT21, GT22 | 0.001 | 1 |
| 03260421 | Springs for GT 22, 0.40 N | 0.4 | For GT22 | 0.001 | 1 |
| 03260425 | Springs for GT 21/22, 4.0 N | 4 | For GT21, GT22 | 0.001 | 1 |
| 03260458 | Springs for GT 27/28, 0.63 N | 0.63 | For GT27, GT28 | 0.355 | 355 |
| 03260464 | Springs for GT 61/62, 1.6 N | 1.6 | For GT61, GT62 | 0.001 | 1 |
| 03260419 | Springs for GT 22 / F = 0.16 N | 0.16 | For GT22 | 0.001 | 1 |
| 03260420 | Springs for GT 22 / F = 0.25 N | 0.25 | For GT22 | 0.001 | 1 |
| 03260457 | Springs for GT 21-22 / F = 0.63 N | 0.63 | For GT21, GT22 | 0.005 | 5 |
| 03260423 | Springs for GT 21-22 / F = 1.6 N | 1.6 | For GT21, GT22 | 0.001 | 1 |
| 03260424 | Springs for GT 21-22 / F = 2.5 N | 2.5 | For GT21, GT22 | 0.001 | 1 |
Documentation
- Document: 15-08-86-catalog extract-numerical index index 3 cat gen en p481
- Document: 15-08-86-catalog extract-spring sets for measuring probes protect
Official manufacturer product page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide
TESA spring set for GT21, GT22, force = 1 N – measuring force 1 N; special feature(s) 1 For GT21, GT22; mass 1 g.
Check compatibility with your probe or display unit (series, contact point thread, shank diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, probes for FMS are mounted on dedicated probe holders, springs and bellows are series-specific.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration
Original TESA accessory: fits without modifications to the instrument. After replacing contact points, springs or extensions, carry out zeroing and, if the display unit provides for it, recalibration of the gain factor.
Calibration and repair
Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.