TESA knife-edge contact points
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA contact point for dial indicators: knife-edge contact point, M2.5 mounting, steel.
Description
M2.5 contact point with knife-edge measuring surface, steel, locknut for radial alignment, Ø 3.4 x 0.3 mm, L = 8 mm.
TESA contact point for dial indicators: knife-edge contact point.
Technical data. Mounting M2.5; probe length 8 mm; dimensions Ø 3.4 x 0.3 mm; material steel; special feature locknut for radial alignment.
Key features
- Material: Steel
- Special feature 1: Locknut for radial alignment
- Mounting: M2.5 mm
- Diameter: Ø 3.4 x 0.3 mm
- Probe length: 8 mm
Technical data
| Special feature 1 | Locknut for radial alignment |
| Mounting [mm] | M2.5 |
Models and variants
| TESA code | Item | Material | Diameter [mm] | Probe length [mm] | Mass [kg] |
|---|---|---|---|---|---|
| 03560024 | Contact points with steel knife-edge measuring surface, locknut for radial alignment | Steel | Ø 3.4 x 0.3 | 8 | 0.001 |
| 03560031 | Steel knife-edge contact point 2 x 0.2, L 5 mm | Steel | Ø 2 x 0.2 | 5 | 0.001 |
| 03560032 | Steel knife-edge contact point 2 x 0.2, L 10 mm | Steel | Ø 2 x 0.2 | 10 | 0.001 |
| 03560033 | Steel knife-edge contact point 2 x 0.2, L 15 mm | Steel | Ø 2 x 0.2 | 15 | 0.002 |
| 03560034 | Steel knife-edge contact point 2 x 0.2, L 20 mm | Steel | Ø 2 x 0.2 | 20 | 0.001 |
| 03560025 | Contact points with carbide knife-edge measuring surface, locknut for radial alignment | Carbide | Ø 3.4 x 0.3 | 8 | 0.001 |
Documentation
- Document: 15-08-78-catalog extract-contatti con superficie di misura a colt
- Document: 15-08-78-catalog extract-contatti con superficie di misura a punt
Official manufacturer product page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide
TESA contact point for dial indicators: contact with knife-edge measuring surface, M2.5 mounting, material steel.
Check compatibility with your probe or display unit (series, contact point thread, shank diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, probes for FMS are mounted on dedicated probe holders, springs and bellows are series-specific.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration
Original TESA accessory: fits without modifications to the instrument. After replacing contact points, springs or extensions, carry out zeroing and, if the display unit provides for it, recalibration of the gain factor.
Calibration and repair
Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.