RODER DIACHECK-CT-160C digital radius gauge – roller-supported base, 160 mm centre distance, standard and Bluetooth versions
- SKU: DIACHECK-CT-160C
- VENDOR: RODER
Couldn't load pickup availability
Safe and secure payments:
Informazioni di prodotto e di utilizzo
RODER DIACHECK-CT digital radius gauge DIACHECK-CT-160C for direct reading of the radius of curvature, internal and external radius from 260 to 760 mm with the same instrument, with a roller-supported base with 160 mm centre distance.
Key features
- Roller-supported base with 160 mm centre distance
- Measuring range: internal and external radius from 260 to 760 mm with the same instrument
- LCD display with 8 mm character height
- Units of measurement: mm and inches
- Battery life of approximately one year
- Interchangeable measuring arches to change the measuring range
- Bluetooth transmission with front button (-BLT version)
Description
The DIACHECK-CT-160C is a digital radius gauge from the RODER DIACHECK-CT series: it is placed on the inside or outside of the curve and directly provides the value of the radius of curvature, without templates and without removing the part from the machine or from its seat.
Supplied complete with a roller-supported base with 160 mm centre distance; measuring range: internal and external radius from 260 to 760 mm with the same instrument. By changing the measuring arch, the same instrument covers different measuring ranges. Version without Bluetooth.
Digital LCD display with 8 mm character height, rotatable through 180° (version without Bluetooth only), battery powered with approximately one year of life in standard mode, units of measurement mm and inches, easy to programme. Hardened steel support rollers fixed with screws and replaceable, interchangeable measuring contact point, measuring instrument mounted on a removable support that can be fitted to several measuring arches, protective case for the digital indicator against impacts and drops.
Available versions: DIACHECK-CT-160C (standard version) · DIACHECK-CT-160C-BLT (version with Bluetooth interface and front button for wireless transmission of the measurement).
Typical applications
- Measuring the radius of curvature of bent tubes
- Measuring the outside diameter of tubes and pipes, including those already laid or buried
- Measuring the radius of curvature of curved sheet metal and vehicle bodywork
- Measuring the diameter of tanks and silos during construction and assembly
- Measuring the radius of curvature of moulded or thermoformed plastic parts
- Measuring the curvature of glass panes and glazing
- Measuring profiles on profile-bending machines, bending machines and forming systems
Technical data
| Series | SMALL RANGE - model DIACHECK-CT-160C |
| Measuring arch | Roller supports - 160 mm centre distance |
| Measuring range | 260-760 mm internal and external radius |
| Display | LCD, 8 mm character height |
| Units of measurement | mm and inch |
| Power supply | Battery, approx. 1 year of life in standard mode |
| Data transmission | Bluetooth with wireless transmission button (-BLT versions only) |
| Product code | DIACHECK-CT-160C · DIACHECK-CT-160C-BLT |
Supplied with
- Radius gauge complete with roller-supported base, 160 mm centre distance, and measuring instrument
- Carrying case not included: to be ordered separately (DIACHECK-CT-VLG-MD)
- Calibration arches not included: to be ordered separately
Compatible accessories
- DIACHECK-CT-C80-ARC – Measuring arch DIACHECK-CT-C80-ARC for small range series - 80 mm roller centre distance - without measuring instrument
- DIACHECK-CT-C160-ARC – Measuring arch DIACHECK-CT-C160-ARC for small range series - 160 mm roller centre distance - without measuring instrument
- DIACHECK-CT-C240-ARC – Measuring arch DIACHECK-CT-C240-ARC for small range series - 240 mm roller centre distance - without measuring instrument
- DIACHECK-CT-25S – Electronic controller DIACHECK-CT-25S with 25 mm range digital indicator - without measuring arch - version without Bluetooth
- DIACHECK-CT-25S-BLT – Electronic controller DIACHECK-CT-25S-BLT with 25 mm range digital indicator - without measuring arch - version with Bluetooth
- DIACHECK-CT-VLG-MD – Carrying case for DIACHECK CT series digital radius gauges - Medium size
- DIACHECK-CT-CALIE-300 – Calibration arch for external and internal radii - nominal value 300 mm
- DIACHECK-CT-CALIE-400 – Calibration arch for external and internal radii - nominal value 400 mm
- DIACHECK-CT-CALIE-500 – Calibration arch for external and internal radii - nominal value 500 mm
- DIACHECK-CT-CALIE-600 – Calibration arch for external and internal radii - nominal value 600 mm
- DIACHECK-CT-CALIE-700 – Calibration arch for external and internal radii - nominal value 700 mm
Documentation
Selection guide: which DIACHECK-CT
DIACHECK-CT digital radius gauges read the radius or diameter directly when the instrument is placed on the curved surface, with no templates and without removing the part. Choose the model according to the measuring range (minimum and maximum radius, internal or external) and the type of support; the exact range of each model is given in the Technical data table.
- Small range series with roller-support base (80C, 160C, 240C): internal and external radii from 55 mm, compact instrument; the same electronic controller can be fitted to several measuring arches.
- Small range series with contact-plate support (200P, 260P, 300P): external radii only, for surfaces where roller supports are not suitable.
- Medium range series (300C, 400C, 500C with ST25 25 mm or ST50 50 mm electronic controller): internal and external radii from 480 up to 10,000 mm.
- Extended range series (500C-E external only, 500C-I internal only): up to 10 m radius.
Each model is available in a standard version and a -BLT version with Bluetooth, which sends the measurement to a PC, tablet or data collection system with a front button: choose it if you need to record measurements or avoid manual transcription.
Carrying case (VLG-MD for the small range series, VLG-GR for medium and extended range) and calibration arches are not included and must be ordered separately. If in doubt, contact us stating the minimum and maximum radius, whether the measurement is internal or external, and the surface finish: our technical support will recommend the right model and measuring arches.
Integration and programming
The DIACHECK-CT is a direct-reading instrument: no programming is required. The electronic controller stores the chord value of the fitted measuring arch and instantly calculates the radius or diameter, which can be displayed in mm or inches. Accuracy depends on the chord length (and therefore on the measuring arch) and on the surface finish: hundredths of a millimetre on small radii, tenths on medium radii, millimetre on large radii.
Standard version: reading on the LCD display with 8 mm high characters, rotatable by 180°, without data output.
-BLT version: built-in Bluetooth interface with a front transmission button, which can also be used with gloves: the measurement is sent to a receiver on a PC, tablet or PLC, for spreadsheets, statistical control software or inspection reports. Our technical team is available for receiver configuration and integration into your data collection system.
The measuring instrument is fitted on a removable mount: it can be moved to the other measuring arches of the same series (DIACHECK-CT-…-ARC, see Compatible accessories) to change the measuring range without buying a second instrument.
Calibration and repair
DIACHECK-CT radius gauges are verified and calibrated with RODER calibration arches: reference surfaces of known radius, supplied with a serial number and, on request, with a measurement certificate traceable to Accredia. Place the instrument on the calibration arch and compare the reading with the nominal value: it takes only a few seconds, even directly on the shop floor.
- DIACHECK-CT-CALIE series (double radius, internal and external): for instruments with roller supports.
- DIACHECK-CT-CALE series (external radius only): for instruments with a contact plate support (P models).
Calibration arches are not included in the supply: choose them with a nominal value close to the radii you usually measure and contact us for the correct match to your model.
Service: DIACHECK-CT digital radius gauges are designed and manufactured by RODER S.r.l.: calibration with certificate, periodic verification, repair and replacement of measuring arches, roller supports and electronic controller are carried out directly by the manufacturer, with fast turnaround times. Contact us stating the model and serial number.