TESA electropneumatic pumps
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA Electric pump for pneumatic probes, 230 V, 50 Hz, foot pedal activation – special feature(s) 1 Foot pedal activation; mass 2067 g.
Description
Electric pump for pneumatic probes, 230 V, 50 Hz, foot pedal activation.
TESA Electric pump for pneumatic probes, 230 V, 50 Hz, foot pedal activation, manufactured by TESA Technology (Switzerland), family «Electropneumatic pumps».
Technical data: Special feature(s) 1: Foot pedal activation; Mass [g]: 2067.
Key features
- Special feature(s) 1: Foot pedal activation
- Mass: 2067 g
Technical data
| Compatibility | For simultaneous lifting of up to 20 measuring plungers with a force of up to 0.63 N. |
Models and variants
| TESA code | Item | Special feature(s) 1 | Mass [kg] | Mass [g] |
|---|---|---|---|---|
| 03260432 | Electropneumatic vacuum pumps for plunger lift via start foot pedal | Foot pedal activation | 2.067 | 2067 |
| 03260433 | Electropneumatic vacuum pumps for plunger lift via external control | Activation via TESA external control | 1.742 | 1742 |
Compatible accessories
- 03540403 – T-fitting for tube Ø 4.7 mm / Ø 2 mm (03540405)
- 03560000 – Straight fitting, M4 thread, for tube Ø 4.7 mm / Ø 2 mm (03540405)
- 03560002 – Angled fitting, M4 thread, for tube Ø 4.7 mm / Ø 2 mm (03540405)
Documentation
- Document: 15-09-67-catalog extract-numerical index index 3 cat gen en p481
- Document: 15-09-67-catalog extract-pneumatic accessories electropneumatic p
Official manufacturer data sheet: tesatechnology.com
Price and availability
Products without a listed price are offered with a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide
TESA electric pump for pneumatic probes, 230 V, 50 Hz, foot-pedal activation – special feature(s) 1 Foot-pedal activation; mass 2067 g.
Check compatibility with your probe or display unit (series, contact point thread, shank diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, probes for FMS are mounted on dedicated probe holders, springs and bellows are series-specific.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration
Original TESA accessory: fits without modifications to the instrument. After replacing contact points, springs or extensions, carry out zeroing and, if the display unit provides for it, recalibration of the gain factor.
Calibration and repair
Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.