Contatti standard con superficie di misura sferica in zaffiro R=1,5 mm / L=6 mm – 03560001
Contatti standard con superficie di misura sferica in zaffiro R=1,5 mm / L=6 mm – 03560001
Contatti standard con superficie di misura sferica in zaffiro R=1,5 mm / L=6 mm – 03560001
Contatti standard con superficie di misura sferica in zaffiro R=1,5 mm / L=6 mm – 03560001
Contatti standard con superficie di misura sferica in zaffiro R=1,5 mm / L=6 mm – 03560001
Contatti standard con superficie di misura sferica in zaffiro R=1,5 mm / L=6 mm – 03560001
Contatti standard con superficie di misura sferica in zaffiro R=1,5 mm / L=6 mm – 03560001
Contatti standard con superficie di misura sferica in zaffiro R=1,5 mm / L=6 mm – 03560001

TESA standard contact points with sapphire spherical measuring surface R=1.5 mm / L=6 mm

Product available on request

This product is priced individually. Fill in the form to receive a dedicated quote.

You are requesting a quote for: TESA standard contact points with sapphire spherical measuring surface R=1.5 mm / L=6 mm
SKU: 03560001
Manufacturer: TESA

Informazioni di prodotto e di utilizzo

TESA contact point for indicators: hemispherical contact point, M2.5 mounting, material: sapphire.

Description

Hemispherical M2.5 contact point, sapphire, R = 1.5 mm, L = 6 mm.

TESA contact point for indicators: hemispherical contact point.

Technical data. M2.5 mounting; Radius 1.5 mm; Probe length 6 mm; Diameter 5 mm; Material: sapphire.

Key features

  • Material: Sapphire
  • Mounting: M2.5; Dimensions mm
  • Diameter: 5 mm
  • Probe length: 6 mm
  • Radius: 1.5 mm

Technical data

Material Sapphire
Mounting [mm] M2.5; Dimensions
Diameter [mm] 5
Probe length [mm] 6
Radius [mm] 1.5
Mass [kg] 0.001
Mass [g] 1

Documentation

Official manufacturer data sheet: tesatechnology.com

Price and availability

Products without a listed price are offered with a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.

Selection guide

TESA contact point for dial indicators: hemispherical contact, M2.5 mounting, material sapphire.

Check compatibility with your probe or display unit (series, contact point thread, shank diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, probes for FMS are mounted on dedicated probe holders, springs and bellows are series-specific.

If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.

Integration

Original TESA accessory: fits without modifications to the instrument. After replacing contact points, springs or extensions, carry out zeroing and, if the display unit provides for it, recalibration of the gain factor.

Calibration and repair

Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.

Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.