TESA 5-pin DIN to USB adapters
This product is priced individually. Fill in the form to receive a dedicated quote.
Informazioni di prodotto e di utilizzo
TESA 5-pin DIN to USB adapter – indication error range 0.3% ± 0.1 µm; mass 10 g; compatible with probes with a sensitivity of 73.75 mV/V/mm.
Description
5-pin DIN to USB adapter.
TESA 5-pin DIN to USB adapter, manufactured by TESA Technology (Switzerland), «5-pin DIN to USB adapters» family.
Technical data: Indication error range [µm]: 0.3% ± 0.1; Mass [g]: 10; Compatibility: For probes with a sensitivity of 73.75 mV/V/mm; Zero drift: ± 0.01% / °C.
Key features
- Indication error range: 0.3% ± 0.1 µm
- Mass: 10 g
- Compatibility: For probes with a sensitivity of 73.75 mV/V/mm
- Zero drift: ± 0.01% / °C
Technical data
| Indication error range [µm] | 0.3% ± 0.1 |
| Zero drift | ± 0.01% / °C |
| Standard | DIN 32876 |
| Resolution | 0.1 μm |
| Protection rating | IP51 |
| Power supply | 2 V RMS, 13 kHz ± 0.5 % |
| Special feature 2 | The total error must take into account that of the standard probe and that of the adapter |
| Dimensions | 1.2 m |
| Working temperature | 20 °C ± 0.5 |
Models and variants
| TESA code | Item | Compatibility | Mass [kg] | Mass [g] |
|---|---|---|---|---|
| 03260500 | 5-pin DIN to USB adapter cable / Measuring range: ± 2 mm | For probes with a sensitivity of 73.75 mV/V/mm | 0.01 | 10 |
| 03260501 | 5-pin DIN to USB adapter cable / Measuring range: ± 5 mm | For probes with a sensitivity of 29.5 mV/V/mm | 0.077 | 77 |
Documentation
- Document: 15-10-33-catalog extract-adapter din 5p to usb extension din 5p c
- Document: 15-10-33-catalog extract-numerical index index 3 cat gen en p481
Official manufacturer product page: tesatechnology.com
Price and availability
Products without a listed price are offered in a configuration defined together with our technical support: contact us for a quote stating the model, quantity and application.
Selection guide
TESA DIN 5p to USB adapter – indication error range 0.3% ± 0.1 µm; mass 10 g; compatible with probes with sensitivity 73.75 mV/V/mm.
Check compatibility with your probe or display unit (series, contact point thread, shank diameter, connector type) before ordering: contact points have an M2.5 thread for GT axial probes, probes for FMS are mounted on dedicated probe holders, springs and bellows are series-specific.
If in doubt, contact us: our technical support will advise you on the right model, measuring force, contact points and display unit for your application.
Integration
Original TESA accessory: fits without modifications to the instrument. After replacing contact points, springs or extensions, carry out zeroing and, if the display unit provides for it, recalibration of the gain factor.
Calibration and repair
Mechanical accessories do not require calibration; after replacing them, check the measuring chain against a known reference. Cables and adapters should be checked for continuity and insulation integrity.
Service: RODER S.r.l. – INNOVACHECK division handles verification, calibration with certificate and repairs of TESA probes and display units in Italy. Contact us stating the model and serial number.